Artists World

Imagination is everything

Drill Glass Through These Simple Steps

At home or at the office, there might be instances when you may need to drill glass. You know how brittle glass can be. That is why there is a need to specially and specifically be careful and light-handed when drilling through glass. You may be unfortunate and unlucky enough to incur cracks or worse, ruin and break the entire glass structure.

When the glass has a thickness that is hard to cut through, you may also find it hard to drill glass. That is why you need to know and practice several specific and recommended techniques in drilling. There may be other techniques around, but so far, the following procedures are considered the most useful and reliable. Here are the recommended steps for you to drill glass effectively and ideally.

1. Choose a glass sheet that will be most suitable and fit for your purpose. You should at the same time consider and take note of the size and the thickness of the glass sheet to be used. It is important to remember not to select safety or tempered glass as drilling and cutting through it may be significantly harder. Also, tempered and safety glass should be only drilled by seasoned and expert craftsmen who may have the necessary and costly equipment.

2. It is time you invest in glass drill bits. This equipment can serve as potent tools in creating holes and drills in glass. Buy glass bits available through the local home keeping shops or centers. Hardware stores may also sell them. Glass drill bits are made with spade shaped points that are made of no other than tungsten carbide, or they may be diamond coated core drill bits, adapted to glass drilling purposes. Drill glass only with such drill bits, which could withstand the friction produced by the drilling process.

3. Before you drill glass, you should cut the glass sheet to the size needed for your particular project. You may also have the glass sheet cut and the edges finished or beveled right from the shop where you bought it. Some glass shops and hardware stores offer free or low cost glass cutting and resizing initiatives based on the request and requirements of clients.

4. Before you drill glass, plan out well where you will put the holes. In doing so, remember that it is not advisable to drill glass near its corners and edges. The ideal distance any hole should be from the edge is about ¾ of an inch. If you can drill the holes farther from the edge than that, it will be better and safer.

5. During the process when you drill glass, put it in a secured and flattened surface where it could be completely and properly supported. You could also put the glass for drilling on top of a rubber pad or some other cushioning, yet firm material. However, make sure the glass is put on a flat and supported material, which can actually be anything to your comfort.

6. As you drill glass using drill bits, control the speed at variable. Doing so could help maintain the tightness of the motor run. Start using a small drill bit and drill slowly. The application of constant pressure as you push when you drill glass should be maintained.

7. When the drill is already near reaching the opposite side, reverse the glass sheet. Drill glass at the back and meet the hole you already make. This is a better technique to prevent chipping, spalling and cracking.

8. As you drill glass and aim to make holes with different sizes, drill holes of the same size first before proceeding to drilling the next hole size.

About the Author

Mike L. provides best and reliable information about mirror and glass products including
drill glass
. He is expert in provide details of drills, tapping, diamond drill bits and
glass drill bits
.

Glass Jewelry Wire Wrapping With Barbara Tilley May 4th @ 8:00PM EST

3 Piece Plastic Airlock (Sold in sets of 3) $0.40 3-piece plastic airlock with a snap-on vented cover. This airlock is easily cleaned and easy to use. Fill the airlock halfway up with your sanitizer and stick in the drilled rubber stopper. Be sure to see the other products offered by Learn To Brew LLC….

Drilled Rubber Stopper (Carboy Bung Sets of 3) $1.20 This is a drilled tapered rubber bung for a better seal and holds the airlock securely in place. A curved lip stops the bung from accidentally falling into the carboy. All three rubber stoppers are the same size and easily fits all 3, 5, 6 and 6.5 gallon glass carboys. These stoppers do not fit plastic carboys or plastic water bottles….

Gold Complete Beer Equipment Kit (K6) with 6 Gallon Glass Carboy $77.98 Take your homebrew to the next level. The Gold Homebrew Kit has all you need to get brewing and adds a glass carboy for secondary fermentation resulting in a cleaner finished brew. Each Equipment Kit Includes: True Brew Handbook & Kit Instructions, 7.8 Gallon Fermenting Bucket, 1 Lid Drilled & Grommet, True Brew Rack & Fill kit, 6 Gallon Glass Carboy, Fermometer Fermentation Thermometer, Small Buo…

Chrome Hearts Eyeglasses Drilled BOC Dri4 Luxury Eyewear Frame All Chrome Hearts Eyewear Purchase Include Original Leather Carrying Case, Cleaning Cloth and Guarantee Card….

Hafele 401.55.935 EKU Combino 60 GR Mixfront Glass Bar Profile Support, 60X22, pre-drilled, aluminum, silver,3.5 meters (each) …

PAD3U PadBoard-3U, Pad per Hole, 2 Sided PCB, Plated Holes , 3.94 x 6.30 in (100 x 160 mm) $12.99 The PadBoard-3U prototyping circuit board has a general purpose pad-per-hole pattern which is good for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. The PCB accepts a 96 pin…

Db 75gal Reef Ready Tank Black With Kit 48x18x20 (Catalog Category: Aquarium / Aquarium Glass Canopies) Db 75gal Reef Ready Tank Black With Kit 48x18x20. Deep Blue Professional – DB Reef Ready AquariumsModel 75 Reef Ready AquariumBuilt to Last, Designed to Impress. Reef Ready Models include compact corner overflow pre-filter, pre-drilled drain return holes, complete plumbing kits, and patented Floodgate technology. All Reef Ready Models have upgrade bottom panels which are drilled and then tempered…

2pc DIAMOND HOLE SAW – CORE DRILL – Set – 1/2 + 1 $7.95 …

A very affordable Fluted Crystal Glass & Brushed Nickel Passage Door Knob Sets for Modern Doors+includes Our Original Wood Adapters to install in modern pre-drilled doors or replacement set for older doors. $39.95 A perfect duplicate if the early 1900s Depression Crystal Passage knobs, we have added a hand made wood adapters to allow you to fit in per-drilled doors with standard 2-3/8, see attachment,. 2-3/4″ back set available on request. This set will arrive with all the hardware needed to install in modern pre-drilled doors. The retrofit hardware contains: Tubular Latch set for with Striker Plate and ma…

Eye Glass Holder Mold $23.95 Firelight Form Ceramic Molds are easy to use, and durable for countless firings. It and 39;s never been so easy to create custom home décor. Pre-drilled; always remember to elevate molds for proper air circulation. Apply kiln wash before use. Measures 6-5/8 by 2-3/4 by 1/2 deep.

11 X 2-1/2 Bowl $47.95 Firelight Form Ceramic Molds are easy to use, and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. Delphi Tip Use pre-cut glass circles with plate and bowl molds.

9-1/4 X 5-3/4 Rectangle Plate $23.95 Ceramic glass slumping molds are extremely durable for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. Large rectangular plate measures 9-1/4 x 5-3/4 x 3/4 deep.

6-1/2 Draping Cylinder $29.95 High quality slumping mold from Creative Paradise. Design and create your own glass vases. Use fusible glass and embellish with stringers, rods or dichroic elements. Pre-drilled; always remember to elevate molds for proper air circulation. Apply kiln wash before use. Measures 6-1/2 tall.

Small Dome Mold – 3-1/4 X 1-1/3 $16.95 Create Exciting Glass Projects Leading glass artist Gloria Badiner shares her designs for your creations. Unique dome shape makes exquisite projects. Imagine bowls made with iridized glass, painted with enamels, sandblasted, or tack fused with dichroic. The creative possibilities are limitless. These premium ceramic hollow molds are pre-drilled and specially designed for glass slumping. Coat with kiln wash before use. Measures 3-14 diameter x 1-1/3 deep. Bowl below made by Delphi artist Roy Kapp.

Square Footed Dish Mold – 5-1/2 $26.95 Create Exciting Glass Projects Leading glass artist Gloria Badiner shares her designs for your creations. Unique square footed dish shape makes exquisite projects. Imagine dishes made with iridized glass, painted with enamels, sandblasted, or tack fused with dichroic. The creative possibilities are limitless. These premium ceramic hollow molds are pre-drilled and specially designed for glass slumping. Coat with kiln wash. Unique footed mold measures 5-1/2 square. Dish shown below created by Delphi artist Val Oswalt

7 1/4 Triangle Plate $22.95 Firelight Form Ceramic Molds are easy to use and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation.

10 Triangle Plate $28.95 Firelight Form Ceramic Molds are easy to use and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation.

11 Round The Thing Drop Ring $21.95 Use with kiln posts and your glass will drop down and create beautiful bowls and vases. Always elevate molds with kiln posts for good circulation, and don and 39;t forget that molds should be drilled to vent air. Mold size 11 with a 7 hole.

8-3/4 Solitaire Plate Mold $16.95 Part of a unique collection glass slumped into this mold creates an elegant linear effect. Conveniently pre-drilled; remember to apply kiln wash before use. Mold measures 8-3/4 square with inner square measuring 5 square. Mold measurements are approximate.

11 Solitaire Plate Mold $24.95 Part of a unique collection glass slumped into this mold creates an elegant linear effect. Conveniently pre-drilled; remember to apply kiln wash before use. Mold measures 11 square x 1-1/2 high. Mold measurements are approximate.

6-1/4 Solitaire Plate Mold $13.95 Part of a unique collection glass slumped into this mold creates an elegant linear effect. Conveniently pre-drilled; remember to apply kiln wash before use. Mold measures 6-1/4 square with inner square measuring 4-1/4 square. Mold measurements are approximate.

4-1/2 Square Dish $16.95 High quality slumping mold from Creative Paradise. With this simple shape you can make a variety of projects from plates to fused glass panels, from the traditional to the avant garde. Pre-drilled; always remember to elevate molds for proper air circulation. Apply kiln wash before use. Measures 4-1/2 by 4-1/2.

9 Drop Out Ring Mold $23.95 Use with kiln posts and your glass will drop down and create beautiful bowls and vases. Always elevate molds with kiln posts for good circulation, and don and 39;t forget that molds should be drilled to vent air. Interior measures 4-3/8 diameter. Outside measures 9 diameter.

12-3/4 X 6-3/4 Deep Tray With Handles $36.95 A Fun New Way to Add Glass to Your Kitchen Decor Use this serving mold to spice up your next dinner party. This reusable ceramic pre-drilled mold can be fired many times, making it an excellent value. Kilnwash before use.

9 Square Spiral Plate Mold $26.95 Slump into the Spiral. Part of a unique collection of dinnerware fusing molds. Glass slumped into this mold creates an elegant spiral. Conveniently pre-drilled; remember to apply kiln wash before use. Measures 9 x 9 with a 5 inside diameter. Image below shows complete set made by Delphi Artist Kayleigh McGrath.

12 Square Spiral Plate Mold $24.95 Slump into the Spiral. Part of a unique collection of dinnerware fusing molds. Glass slumped into this mold creates an elegant spiral. Conveniently pre-drilled; remember to apply kiln wash before use. Mold measures 12x 12 with a 6-1/2 inside diameter. Image below shows complete set made by Delphi Artist Kayleigh McGrath.

14 Veggie Tray $27.95 A Fun New Way to Add Glass to Your Kitchen Decor Use a section mold to spice up your next dinner party. This reusable ceramic pre-drilled mold can be fired many times, making it an excellent value. Kilnwash before use.

11 Pumpkin Plate $47.95 Bring the Beauty of Autumn Indoors with Glass Glass pumpkins are a favorite project. Slump gorgeous ring mottled glass, or fuse brilliant oranges and greens to create a festive decoration or serving dish. Mold features realistic pumpkin detail, which is shown in your finished glass project (see example below). Pre-drilled sturdy ceramic mold can be fired many times. Kiln wash before use. Mold 11-3/5 x 11 x 2 deep. Delphi artist Roy Kapp created the pumpkin shown by fusing orange and green glass, and adding stem detail with Bullseye green rod.

Incense Burner Mold $35.95 Fill your home with glass art that smells as lovely as it looks. Pre-drilled mold measures 12 x 2. To create the hole to hold the incense follow these simple steps 1. Cut a strip of 1/8 thick fiber paper to 1/4 x 1/2. Cut a strip of glass to 1/4 x 2-1/4. 2. Cut a 2-1/4 x 12 piece of glass for the body of the incense burner. Position the fiber paper and glass strip on top of the base glass, about 1 from the end. Full fuse. 3. Leave the fiber paper in place. Position the full fused piece of glass on the mold. Slump. 4. To remove the fiber paper use a piece of wire or a pipe cleaner. A second option is to use a 1/8 drill bit to drill a hole in the glass after the piece is slumped. Finished project shown created with Vienna Spirit glass X43176.

Medium Dome Mold – 7 X 2-1/4 $22.95 Create Exciting Glass Projects Leading glass artist Gloria Badiner shares her designs for your creations. Unique dome shape makes exquisite projects. Imagine bowls made with iridized glass, painted with enamels, sandblasted, or tack fused with dichroic. The creative possibilities are limitless. Premium ceramic hollow molds measures 7 wide x 3-1/2 high, pre-drilled and specially designed for glass slumping. Coat with kiln wash. Makes bowls 7 diameter x 2-1/4 deep. Bowl below made by Delphi artist Roy Kapp, displayed in stand 1151.

10 X 8 Double Bells Dish $34.95 Let the Celebration Bells Ring Our festive mold is the perfect serving dish for your next holiday party, decorating your home or making a special gift. Versatile mold can create both holiday bells and wedding bells. Pre-drilled ceramic mold can be fired many times. Kiln wash before use. Mold 10 x 8 x 1 deep. Finished project by Julie Nelson. Created with Bullseye Mardi Gras Traditional Christmas glass on white glass.

12-1/4 X 8 Wave Platter Mold $26.95 Catch the Wave. This glass mold features a dramatic wave. It and 39;s beautiful enough to be a centerpiece in your home, but it also makes a wonderful hors d and 39;oeuvres plate. Pre-drilled. Measures 12-1/4 x 8 x 1-3/4. Delphi Tip Try slumping your fused glass at a hotter temperature (1265F – 1280F) for more definition from this mold. Project below by Delphi Artist Kayleigh McGrath.

7 Round Spiral Bowl Mold $27.95 Create contemporary art with this elegantly waved plate mold. Reusable mold is pre-drilled and can be fired many times. Mold must be kiln washed before use. Measures 7 in diameter across the bottom, 6-1/2 across the top x 1-3/4 deep. Project next to mold created with Aurora Borealis Dichroic Glass. Project below by Teresa Batten, created with Dichroic Hot Lava on Black glass.

7 Square Dish $35.95 High quality slumping mold from Creative Paradise. Large enough to create dinner plates or large fusing projects, this slumper is a must. Use fusible glass and add stringers, confetti and even decals to add excitement. Pre-drilled; always remember to elevate molds for proper air circulation. Apply kiln wash before use. Mold measures 7 by 7, glass must measure 6 x 6.

10 Square Dish $58.95 High quality slumping mold from Creative Paradise. One of our largest slumping molds, use it to create serving dishes, fused glass panels or whatever else you desire. Use stringers, frits and even glass enamel to add details to your work. Pre-drilled; always remember to elevate molds for proper air circulation. Apply kiln wash before use. Measures 10 by 10.

9-1/2 Parted Square $34.95 A Fun New Way to Add Glass to Your Kitchen Decor Use a section mold to spice up your next dinner party. This reusable ceramic pre-drilled mold can be fired many times, making it an excellent value, Kilnwash before use. Project above created by Delphi Artist and Instructor Roy Kapp with Dichroic Cool Lava on Black glass.

8-1/2 Spoon Rest $14.93 A Fun New Way to Add Glass to Your Kitchen Decor Use this practical mold to create a glass spoon rest that will not only keep your counter top clean, but makes a beautiful display when not in use. This reusable ceramic pre-drilled mold can be fired many times, making it an excellent value. Kiln wash before use. Mold measures 8-1/2 x 3.

11-1/2 X 6-1/2 Torso Mold $52.95 Sculptural nude torso mold is just the right size to display. Dress her up by fusing jewelry or fusing clothing on the glass, or leave her as is with a beautiful piece of glass. Firelight Form Ceramic Molds are easy to use, and durable for countless firings. It and 39;s never been so easy to create custom home decor. Pre-drilled; always remember to elevate molds for proper air circulation. Apply kiln wash before use.

8 Simple Spoon Rest $16.95 A Fun Way to Add Glass to Your Kitchen Decor Use this practical mold to create a glass spoon rest that will not only keep your counter top clean, but makes a beautiful display when not in use. This reusable ceramic pre-drilled mold can be fired many times, making it an excellent value. Kiln wash before use. Mold measures 8 x 4-1/2.

9-1/4 Curved Spoon Rest $17.95 Add Glass to Your Kitchen Decor Use this practical mold to create a glass spoon rest that will not only keep your counter top clean, but makes a beautiful display when not in use. This reusable ceramic pre-drilled mold can be fired many times, making it an excellent value. Kiln wash before use. Mold measures 9-1/4 x 3.

8-1/4 Octagon Bowl $27.95 Firelight Form Ceramic Molds are easy to use and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. Octagon bowl measures 8 1/4 by 1-3/8 deep.

12-3/4 Octagon Bowl $43.95 Firelight Form Ceramic Molds are easy to use, and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. Octagon bowl measures 12.75 wide by 2.25 inches deep.

15-1/2 X 10 Leaf Platter $62.95 Bring the Beauty of Nature Indoors Firelight Form Ceramic Molds are easy to use, and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. Measures 15-1/2 long by 10 wide.

10 X 5 Rectangle Plate $32.95 Firelight Form Ceramic Molds are easy to use, and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. Measures 10 long by 5 wide.

12 Round Ruffled Bowl $22.93 Firelight Form Ceramic Molds are easy to use, and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. 12 diameter, 2-1/2 deep.

Mini Octagon Bowl $20.95 Ideal For Small Kilns Make a shallow octagon bowl with this 5 diameter ceramic mold. Reuseable molds are conveniently pre-drilled. Due to manufacturing process, sizes may vary slightly. Apply kiln wash before use.

4-3/4 Square Plate $22.95 Firelight Form Ceramic Molds are easy to use, and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. Mold measures 4-3/4 square x 1 high.

6-1/2 Round Bowl With Lip $25.95 Firelight Form Ceramic Molds are easy to use, and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. Mold measures 6-1/2 x 1-3/4.

11-1/4 Origami Bowl Mold $45.95 Create Contemporary Art Reusable mold is pre-drilled and can be fired many times. Mold must be kiln washed before use. Measures 11-1/4 x 1-3/4. Project shown above created by artist Lisa Parks.

14 Abstract Plate Mold $36.93 Create contemporary art with this fun and funky plate mold. Reusable mold is pre-drilled and can be fired many times. Mold must be kiln washed before use. Measures 14 in diameter.

4-1/2 X 3-1/8 Rectangular Soap Dish $26.95 Firelight Form Ceramic Molds are easy to use and will be good for countless firings. Pre-drilled; always remember to elevate molds for proper air circulation. Soap dish measures 4-1/2 x 3-1/8.

7 X 2 Origami Bowl Mold $35.95 Create Contemporary Art Reusable mold is pre-drilled and can be fired many times. Mold must be kiln washed before use. Measures 7 x 2.

Image Wheel – Chrome $27.95 Back by Popular Demand. The chromed image wheel is a fast and amazingly easy way to create breath-taking kaleidoscope images. By filling the rotating chamber with bits of glass, beads, faceted jewels or other colorful treasures you can create completely custom kaleidoscopes. Simply affix the pre-drilled glass disks to both ends of the wheel with a bit of epoxy, or foil and solder to secure them. The included axel pack makes mounting the image wheel to your kaleidoscope simple. The package includes one 2.5 Brass ring (9/16 wide) 2 glass wheels that fit in the grooved inner ring, and a complete axel assembly. Gems are not included.

Ripple Windchime Mold $26.95 Create unique artwork with this durable, pre-drilled ceramic mold. This mold can be used for a variety of projects, from desk displays to windchimes, adding dimension and depth to your glass designs. Make a stunningly simple project by slumping a beautiful piece of glass for display, or add embellishments for an intricate design. Either way, your artwork is sure to be noticed. 11-1/3 x 3-1/2. For best results, elevate the mold on kiln posts during firing. Apply kiln wash before use. The fun flower windchime shown here was created by Jen Olsen and Melanie Churchill using Opal Art glass and System 96 Cut Ups.

1/2 Single Hole Pre-cut Metal Circle Assortment $8.95 Use Convenient Metal Shapes for Perfect Results Save time and make professional metal art jewelry easily with metal stamps and these pre-drilled metal shapes. Assortment contains 3 of each metal plating silver, gold and copper. 9 pieces total. Measures 1/2 in diameter with one pre-drilled hole. Love bracelet Artist Kayleigh McGrath.